www.hoverboardrepair.com
If you purchased a mainboard or a kit replacement and you experience violent shaking or the hoverboard is going in reverse direction you should try these steps.
You should always try this combination of wire connections first for the 3 color separate wires. You must do this on both sides.
YELLOW of the mainboard to YELLOW of the motor.
GREEN of the mainboard to GREEN of the motor.
BLUE of the mainboard to BLUE of the motor.
If that did not fix the problem or the problem is still present then you should try this combination for those same 3 wires. You must do this on both sides.
GREEN of the mainboard to BLUE of the motor.
BLUE of the mainboard to YELLOW of the motor.
YELLOW of the mainboard to GREEN of the motor.
99% of all hoverboard use one of these two combinations. But if none of these combinations work to get you a smooth ride, then there is only 4 other color combinations possible left to test and only one combination works. You must do this on both sides.
If you purchased a wheel only and have this problem, you should keep the original wheel at the original combination and only change the combination for the new wheel.
You should always try this combination of wire connections first for the 3 color separate wires. You must only change the side with the new wheel.
YELLOW of the mainboard to YELLOW of the motor.
GREEN of the mainboard to GREEN of the motor.
BLUE of the mainboard to BLUE of the motor.
If that did not fix the problem or the problem is still present then you should try this combination for those same 3 wires. You must only change the side with the new wheel.
GREEN of the mainboard to BLUE of the motor.
BLUE of the mainboard to YELLOW of the motor.
YELLOW of the mainboard to GREEN of the motor.
source
0 Comments